Home/Blog/Potassium Acetate in Airport Runway De-icers - AMS 1435
Back to Blog

Potassium Acetate in Airport Runway De-icers - AMS 1435

Why Is Road Salting Not Used at Airports?

Aircraft aluminium alloys and runway lighting systems are extremely sensitive to chloride-based salts. That is why airports have to use a potassium acetate-based runway de-icing solution that complies with the AMS 1435 standard.

Advantages of Potassium Acetate

  • Freezing point down to −50 °C
  • Does not cause corrosion on aircraft metals or runway light fittings
  • Low biological oxygen demand (BOD) — limited environmental impact
  • Non-toxic

POLIDE ICE is a product that meets all of these criteria, is manufactured to the AMS 1435 specification and has been specially developed for airport and apron operations.

Technical Properties: With Laboratory Data

POLIDE ICE is a colourless, clear solution based on 50% potassium acetate (CH₃COOK). According to the technical data sheet, the product has a freezing point of −55 °C (below −50 °C), a pH value of 9.76 and a density of 1.27 g/cm³ at 20 °C. Its boiling point is 116 °C; the product is non-flammable and shows no flammable properties even above 550 °C — a critical advantage in areas requiring a high level of safety, such as airports. Its shelf life is at least 2 years, and it has a clear, low-viscosity structure that requires no agitation during application.

De-icing and Anti-icing: The Right Application Method

Runway de-icer applications serve two different purposes. De-icing is the removal of a layer of snow or ice that has already formed on the runway. Anti-icing, on the other hand, is carried out to protect the runway in advance against expected snow/frost conditions. If a thick layer of ice has already formed on the runway, the liquid product should be supported by mechanical ice scraping. The application rate per square metre varies according to the air temperature and the type of icing (thin ice, snow or frozen ice) — colder weather conditions require a higher dosage. It can be applied directly with standard airport spraying vehicles.

Independent Test Results and Environmental Safety

The effect of POLIDE ICE on asphalt was also assessed in a Yıldız Technical University report based on a review of the international literature of the last 20 years: although certain known alkali reaction risks of potassium acetate at high concentrations are discussed in the literature, no adverse finding of this kind was found for the product itself, and it was found to be safe for use on asphalt surfaces. Environmental impact tests confirmed that the product is not toxic to fish, with an LC50 value of >1,000 mg/L on zebra fish, that it is more than 90% biodegradable, and that it remains below the PNEC (predicted no-effect concentration) thresholds set for fresh water, sea water and soil.

Areas of Use and Equipment Compatibility

POLIDE ICE is used for both de-icing and anti-icing on runways, aprons, taxiways and airport perimeter roads. It can be sprayed directly with standard airport spraying vehicles and requires no additional investment in equipment. Thanks to its clear, low-viscosity structure, it remains fluid even in cold weather and poses no risk of clogging in spraying systems. The product can be used with the same formula both in planned winter maintenance programmes (anti-icing) and for emergency response after sudden snow or ice (de-icing) — enabling airport operators to meet two different needs with a single product.

Related Product

POLIDE ICE

Technical Documents

You can request MSDS and TDS documents from our technical documents page.