HomeProductsMETOX ANTIFROZEN (N)
Back to Products

METOX ANTIFROZEN (N) Industrial Heat Transfer Fluid (Ethylene Glycol)

METOX Antifrozen (N) is a clear, transparent monoethylene glycol (MEG)-based heat transfer fluid used in closed hot water heating systems, heat pumps, industrial cooling installations and heat recovery systems. It is manufactured under a DIN EN ISO 9001 quality system. Its corrosion inhibitor package is free of nitrites, amines, borates, silicates and phosphates; it is formulated without carcinogenic/mutagenic/reprotoxic (CMR) substances. Technical data: density at 20 °C approx. 1.11 g/cm³, boiling point approx. 166 °C, pH approx. 8.5, kinematic viscosity approx. 20 mm²/s. The minimum use concentration is 20% by volume (freeze protection −9/−10 °C); it is suitable for continuous service temperatures from −50 °C to +150 °C. At concentrations of 38% or more, no bursting effect occurs at any temperature. Freeze protection by application: −10/−20 °C in hot water heating systems, −10/−15 °C in circuits combined with heat pumps, −10/−40 °C in cooling systems and −20 °C as a leak detection fluid. The effectiveness of the corrosion inhibitors is continuously tested to ASTM D 1384; compared with an uninhibited ethylene glycol/water mixture, the corrosion loss measured on steel after 3,000 hours has been reduced from −152 g/m² to −0.5 g/m². The product is miscible with water in any ratio and does not cause phase separation in solution.
METOX ANTIFROZEN N ethylene glycol-based heat transfer fluid, 30 kg jerrycan

Key Features

  • Prevents freezing
  • Prevents scale and corrosion
  • Improves heat transfer

Mixing calculator

Enter the system volume and the lowest expected temperature; the calculator shows the ratio and quantity based on the freezing point table in the TDS.

Recommended ratio: 35% METOX ANTIFROZEN N by volume (freezing point approx. -20 °C)

≈ 389 kg ANTIFROZEN N + 650 L water

Product quantity: 350 L × 1.11 kg/L (density, 20 °C, TDS)

Values are approximate (ASTM D 1177 / DIN 51583, by volume). The minimum use concentration is 20% by volume. Contact us for a calculation specific to your system.

METOX ANTIFROZEN N — industrial systems

METOX ANTIFROZEN N is a concentrated heat transfer fluid based on monoethylene glycol (MEG) and containing special corrosion inhibitors. It is used mixed with water.

By lowering the freezing point of water it prevents the system from freezing, and by raising the boiling point it allows the system to operate efficiently over a wider temperature range. Its inhibitor package prevents corrosion, rust and scale from forming on metal surfaces.

Areas of use:

  • HVAC (heating, ventilation and air conditioning) systems
  • Industrial process cooling systems (chillers)
  • Chemical processing plants
  • CNC machine cooling units
  • Trains and railway systems
  • Wind turbines
  • Industrial-scale solar power plants
  • Underfloor heating systems
  • Ice rinks and ice-skating venues
  • Waste heat recovery heat exchangers
  • Atmospheric heat exchangers
  • Sprinkler (fire-extinguishing) systems
WARNING: METOX ANTIFROZEN N must never be used in food, beverage or drinking water systems. Use METOX ANTIFROZEN L for these applications.

Quick Action

Request a quote now to get detailed information, request technical specifications or place an order for this product.

Product Category

Technical Documents

You can request MSDS and TDS documents from our technical documents page.

METOX ANTIFROZEN (N) — Frequently Asked Questions

MEG (ethylene glycol) is toxic; it is used in closed-circuit industrial systems. MPG (propylene glycol) has low toxicity; it is used in systems where there is a risk of contact with food, beverages, pharmaceuticals or drinking water. If there is a possibility of contact with food or people in the event of a leak, MPG is chosen.

METOX ANTIFROZEN N for industrial cooling, HVAC, chillers, railway systems and wind turbines. METOX ANTIFROZEN L for food, beverage and pharmaceutical plants and communal buildings. METOX ANTIFROZEN SOLAR for solar hot water systems.

Add a 5–10 °C safety margin to the lowest temperature in your region and choose the ratio from the concentration table. Example: 40–45% V/V for a region with a minimum of −15 °C.

Do not use it. The calcium and magnesium in mains water react with the inhibitor package and form a precipitate. Use soft water or purified water.

Check the pH and mixing ratio once a year. If the pH is falling or there is cloudiness/sediment, it is time for a change. METOX ANTIFROZEN SOLAR has a longer change interval owing to its resistance to thermal shock.

Do not mix them. Different inhibitor technologies can react with each other and form a precipitate. When changing brands, the system should be drained and flushed.

No. The N product is ethylene glycol-based and toxic; it must never be used in food, beverage or drinking water systems. Use METOX ANTIFROZEN L for these applications.

25 kg jerrycan · 30 kg jerrycan · 1,000 kg IBC tank