HomeProductsPLAS ICE
Back to Products

PLAS ICE De-icing and Anti-icing Solution

PLAS ICE de-icing solution in a 35 kg jerrycan

PLAS ICE · 35 kg jerrycan

Snow and ice de-icing solution. To order or for information:

Request a Quote
PLAS ICE is a professional de-icing and anti-icing solution that quickly and effectively melts the layer of snow and ice that forms on surfaces in severe winter conditions, while also preventing re-icing. It is used on roads, ramps and car parks both as a snow-melting solution and as a snow and ice de-icing solution. Thanks to its salt-free formula, which does not cause corrosion on metal and concrete surfaces, it is a preferred product for your road de-icing needs. Its special formula, suitable for industrial use, delivers high efficiency on roads, ramps, car parks, factory yards and open areas. Also searched for as a snow and ice de-icer and ice melter, PLAS ICE helps melt snow and ice on surfaces. It acts much faster than conventional salt applications and performs down to −40 °C. Thanks to the protective film it forms on the surface, it delays re-freezing. Thanks to its clear, transparent nature, it leaves no stains or marks on asphalt, concrete, marble and metal surfaces and minimises the risk of corrosion.

Key Features

  • High performance, effective down to −40 °C
  • Fast reaction: melts ice within seconds
  • Forms a film that prevents re-icing
  • Does not cause corrosion on concrete, asphalt and metal surfaces
  • Environmentally friendly, biodegradable formula
  • Salt-free; leaves no residue or deposits
  • Easy application by spraying or pouring

PLAS ICE is a liquid de-icing solution and anti-icing solution manufactured to combat snow and ice forming on roads, car parks, ramps, walkways, yards and large open areas in winter. In the field it is also known as a snow and ice de-icer or snow-melting solution. Applied before snowfall, it stops snow and ice from bonding to the surface; applied after precipitation, it melts the existing ice layer. A single product performs both the anti-icing and the de-icing function.

The product is based on magnesium chloride and calcium chloride. These two active substances lower the freezing point of water far below what sodium chloride (road salt) can achieve: PLAS ICE remains effective down to −40 °C, whereas road salt in practice does not work below the −6 to −10 °C range. This is why municipalities, highway authorities, airports, logistics centres and industrial facilities choose PLAS ICE.

The product is used by organisations running Türkiye's most intensive winter operations — from the Presidential Complex (T.C. Cumhurbaşkanlığı Külliyesi) to the Municipalities of Kocaeli, Giresun, Isparta, Batman and Tokat, and from the Regional Directorates of Karayolları (General Directorate of Highways) to TUSAŞ (Turkish Aerospace).

How does PLAS ICE work?

A de-icer has only one job: to lower the freezing point of water below the ambient temperature. Water freezes at 0 °C; when a salt is dissolved in it, the freezing point drops. This is called freezing point depression, and it is directly proportional to the ion concentration in the solution.

When dissolved, the magnesium chloride and calcium chloride in PLAS ICE produce more ions than sodium chloride and have a lower eutectic point. This is why PLAS ICE still works at temperatures at which road salt is completely ineffective.

There is a second mechanism: calcium and magnesium chloride release heat on contact with water (exothermic dissolution). Road salt, by contrast, absorbs heat from its surroundings as it dissolves. In other words, PLAS ICE starts melting ice with its own heat, while road salt must first wait for heat from the environment in order to dissolve. At low temperatures, this difference determines whether the effect begins within minutes or only hours later.

The third difference lies in the method of application. PLAS ICE is a liquid and is sprayed directly. It spreads evenly over the surface, is not blown away by wind or traffic and does not splash onto the road shoulders. When solid crystals are spread, a significant proportion of the grains is blown off the road surface and lost; with liquid application there is no such loss. The liquid form also makes pre-precipitation (anti-icing) application possible — solid salt spread on a dry surface does not stay in place, whereas a liquid film does.

The thin film left on the treated surface prevents ice from mechanically bonding to asphalt or concrete after precipitation. The plough blade clears this surface in a single pass; no second or third pass is needed to scrape off the ice.

Technical properties

PropertyValueWhat it means
Product typeDe-icing and anti-icing solutionBoth de-icing and anti-icing with a single product
Active substanceMagnesium chloride + calcium chlorideMuch lower freezing point than road salt (NaCl)
AppearanceClear, transparent liquidLeaves no stains on coloured surfaces, marble or paving stones
Density (20 °C)1.25 g/cm³1 litre ≈ 1.25 kg — used for dosage calculation
pH (20 °C)7.0 – 9.0 (neutral/slightly alkaline)No acidic attack on concrete surfaces
Freezing point< −40 °CRemains liquid even in the coldest regions of Türkiye
Boiling point> 110 °CNo evaporation loss during summer storage
Solubility100% in waterNo residue, deposits or sludge
Flash pointNone (non-flammable)Not subject to flammable liquid storage regulations
Shelf life2 years from productionProduct left at the end of the season can be used the following season
StorageCool, dry place away from sunlightDoes not freeze; can be kept outdoors in IBC tanks

Packaging: 35 kg jerrycan · 1,250 kg IBC tank · bulk tanker

How is PLAS ICE snow and ice de-icer applied?

PLAS ICE is applied undiluted, in concentrated form. The application equipment is selected according to the size of the area:

  • Backpack or hand sprayer — small areas such as stairs, ramps, pedestrian entrances and estate roads
  • Vehicle-mounted spray tank — municipal and highway applications, factory yards, car park levels
  • Fixed sprinkler / nozzle line — critical, recurring points such as bridges, viaducts and tunnel entrances

The only technical requirement when choosing equipment is that the parts in contact with the product are resistant to chloride solutions. Pumps with stainless steel, polyethylene or polypropylene bodies are suitable.

The aim is for the product to reach the surface evenly rather than in spots. Overdosing brings no extra benefit, while underdosing causes partial melting and leaves a slushy mixture on the surface — when this mixture refreezes, it is more slippery than dry ice.

Application rates

Type of applicationWhenRate
Anti-icingAfter a weather warning, 2–6 hours before precipitation starts100 – 150 g/m²
De-icingAfter ice or snow has formed on the surface150 – 350 g/m²

The de-icing rate is moved towards the upper end of the range according to ice thickness and temperature. For applications below −20 °C and for ice layers thicker than 3 cm, 350 g/m² is used as the basis.

The difference between anti-icing and de-icing

Confusing these two applications is the most common mistake in winter operations, and it is directly reflected in costs.

Anti-icing is the application carried out before precipitation starts. PLAS ICE sprayed onto the dry surface leaves a thin film; when precipitation begins, snow and ice fall onto this film and cannot bond to the surface. The result: a thick, hard ice layer never forms, and mechanical clearing is completed in a single pass.

De-icing is the application carried out after ice or snow has formed on the surface. The product penetrates the ice layer and detaches it from the surface.

The difference is cost. Anti-icing works with 100–150 g/m²; de-icing on the same road after ice has formed requires 150–350 g/m² — that is, two to three times as much product. On top of this come extra plough passes, extra fuel and extra staff hours. A winter plan that follows weather warnings significantly reduces seasonal chemical consumption.

The rule is simple: when the warning comes, go out before the precipitation.

Does it damage concrete?

No. The pH of PLAS ICE is in the 7.0 – 9.0 range, i.e. neutral or slightly alkaline. The chemical mechanism that damages concrete is acidic attack, and PLAS ICE is not acidic. The product is 100% soluble in water and leaves no crystallising residue on the surface.

Another advantage of PLAS ICE is that it does not cause re-freezing on the surface. Road salt melts ice only partially, and the melted water refreezes after a while; this freeze–thaw cycle can repeat several times in one night. PLAS ICE, however, keeps the solution liquid down to −40 °C, so no re-freezing occurs on the surface — this effect is eliminated.

At the recommended rates, PLAS ICE leaves no marks or stains on asphalt, concrete, marble, granite, paving stones, galvanised and painted metal surfaces.

Comparison with road salt (NaCl)

The active substances of PLAS ICE are magnesium chloride and calcium chloride. These are chloride compounds, but they are not road salt (sodium chloride / NaCl). The difference determines the outcome of the winter operation:

CriterionPLAS ICERoad salt (NaCl)
FormLiquid — sprayedSolid crystals — spread
Effective temperatureDown to −40 °CIn practice −6 to −10 °C; ineffective below
Dissolution behaviourExothermic — releases heat, starts working immediatelyEndothermic — absorbs heat from its surroundings, slows down in the cold
Onset of actionWithin minutesDepends on surface heat, can take hours
Pre-precipitation (anti-icing) useSuitable — the film stays on the surfaceNot suitable — does not stay on a dry surface, is blown away
Application lossNegligibleHigh losses from being blown away by wind and traffic
Surface distributionEven filmPatchy, uneven
ResidueNone, 100% soluble in waterWhite salt residue, carried indoors on shoes and vehicle tyres
pH7.0 – 9.0 (neutral/slightly alkaline)~7 (but high residue and re-freezing effect)
Re-freezing on the surfacePrevents it — the solution stays liquidMelted water can refreeze
StorageLiquid, does not freeze, kept in IBC tanksAbsorbs moisture, cakes, requires a covered silo
Plants and soilLow impactCumulative damage to roadside vegetation

A note on comparing costs: Compare on the basis of total seasonal cost, not price per kilogram. Road salt has a low price per kilogram; however, losses from scattering, second and third plough passes, extra staff hours, concrete and vehicle repairs and the cost of covered silo storage reverse the picture by the end of the season. In an operation with anti-icing planning, PLAS ICE consumption is two to three times lower than with de-icing.

Areas of use

Municipal roads, pavements and squares. In squares and on pavements with heavy pedestrian traffic, road salt residue creates both an appearance and a cleaning problem. Because PLAS ICE leaves no residue, it is preferred for shopping streets and historic areas.

Highways, bridges and viaducts. Bridge decks also cool from below, so they ice up before the rest of the road. At these points, anti-icing is the only practical measure against sudden icing.

Airport aprons and service roads. POLIDE ICE is used for runway surfaces in contact with aircraft; PLAS ICE is suitable for apron surroundings, service roads and staff walkways.

Factory and production site yards. Icing in forklift and truck manoeuvring areas means occupational accidents and production stoppages. Anti-icing before the start of a shift keeps the yard open.

Logistics and distribution centres. Loading ramps and truck waiting areas are sloped; they are the points most exposed to icing.

Car parks, estate roads and ramps. Covered car park ramps are the most critical point: warm air from inside condenses and freezes at the ramp entrance.

Entrances of shopping centres, hospitals and public buildings. Icing in front of entrances is a direct matter of institutional liability.

Train, metro and rail system platforms. Icing at the platform edge is a priority risk point for passenger safety.

References

PLAS ICE has a broad user base in the public and private sectors.

Public and central administration: T.C. Cumhurbaşkanlığı (Presidency of the Republic of Türkiye) / Beştepe · T.C. Başbakanlık (Prime Ministry) / Çankaya · T.C. Dışişleri Bakanlığı (Ministry of Foreign Affairs) / Ankara · T.C. Karayolları (General Directorate of Highways) 1st, 4th (Ankara) and 14th (Bursa) Regional Directorates · Muş Emniyet Müdürlüğü (Muş Police Department), Logistics Branch

Metropolitan and district municipalities: İstanbul · Ankara · Bursa · Kayseri · Kocaeli · Gaziantep Metropolitan Municipalities · Şişli · Sarıyer · Bahçeşehir · Bolu · Isparta · Edirne · Sivas · Bartın · Rize · Kastamonu · Bozüyük · Çan · Uşak Municipalities · Van Water and Sewerage Administration (VASKİ) · Çanakkale Special Provincial Administration

Aviation and defence: TUSAŞ Türk Havacılık ve Uzay Sanayii A.Ş. (Turkish Aerospace) · Anadolu University School of Civil Aviation · THY DO & CO

Construction and real estate: Rönesans Holding (Presidential Palace construction) · TAV İnşaat (TAV Construction) · Limak İnşaat · Yüksel İnşaat · Ağaoğlu Group of Companies · Sinpaş GYO · Varyap Meridian · Dumankaya İnşaat · Sur Yapı

Many of the organisations listed have used PLAS ICE over several winter seasons.

Quality documents and test reports

PLAS ICE has been tested in accredited laboratories:

Test / StandardWhat it measures
ASTM D 1177Standard test method for the freezing point of engine coolants — verifies the product's declared low-temperature performance
ASTM E 70pH measurement with a glass electrode — key indicator of concrete and metal compatibility
SHRP H-205.2Ice melting capacity test — a de-icer-specific standard that measures the amount of ice melted at a given temperature and time
Corrosion testsReports showing no corrosive effect on metal surfaces
Yıldız Technical UniversityAnalysis report of the Department of Chemistry, Faculty of Arts and Sciences (Report No. 296)

Organisations preparing technical specifications may request copies of these documents.

Quick Action

Request a quote now to get detailed information, request technical specifications or place an order for this product.

Product Category

Technical Documents

You can request MSDS and TDS documents from our technical documents page.

PLAS ICE — Frequently Asked Questions

They describe the same product group. Applied before precipitation, PLAS ICE works as an anti-icer (anti-icing); applied after snow or ice has formed, it works as a snow melter / de-icer (de-icing). 100–150 g/m² is used for anti-icing and 150–350 g/m² for de-icing.

100–150 g/m² is used for anti-icing and 150–350 g/m² for de-icing. Accordingly, a 1,250 kg IBC tank covers approximately 8,300–12,500 m² for preventive application and approximately 3,550–8,300 m² for de-icing.

Its freezing point is below −40 °C and it remains effective down to this temperature. In practice, road salt does not work below the −6 to −10 °C range.

No. With a pH in the 7.0–9.0 range it causes no acidic attack, and because it dissolves completely in water it leaves no residue.

Thanks to exothermic dissolution it starts working on contact; visible melting begins within minutes, depending on ice thickness and ambient temperature.

No. The active substances of PLAS ICE are magnesium chloride and calcium chloride; it does not contain sodium chloride (road salt).

It does not freeze. Store it in a cool, dry place away from sunlight. Shelf life is 2 years from the date of manufacture; product left at the end of the season can be used the following winter.

Corrosion tests show no corrosive effect on metal surfaces at the recommended rates.

It is available in 35 kg jerrycans, 1,250 kg IBC tanks and by bulk tanker.

Within Türkiye, the minimum order quantity is one 35 kg jerrycan; for export orders, quantities are agreed per shipment.