METOX Stainless Steel Passivation Liquid and Weld Cleaning Chemicals
Key Features
- Removes 100% of weld stains and heat discolouration
- Forms a protective passive layer (chromium oxide) on the surface
- Application versatility in gel, liquid and spray forms
- High reaction rate
- Formulas free from heavy metals
Product Details and Variants
The METOX chemical family consists of products used to remove oxides, heat tint and surface contamination formed on stainless steel surfaces after welding, cutting, grinding and blasting, and then to re-passivate the surface.
The source of the problem is this: what makes stainless steel stainless is not chromium itself, but the chromium oxide layer only a few nanometres thick that chromium forms with atmospheric oxygen — this is called the passive layer. The high temperature generated during welding damages this layer and leaves a chromium-depleted thermal oxide layer (heat tint) on the surface. The blue–purple–yellow discolouration next to the weld seam is exactly this.
This discolouration is not merely a cosmetic defect. The chromium-depleted zone has significantly lower corrosion resistance than the rest of the material. In food, pharmaceutical, chemical and seawater applications, the first rusting always starts in this zone. A grade 316 stainless steel that has not been cleaned after welding does not behave like 316 in the weld zone.
What is pickling?
Pickling is the chemical removal of weld oxides, heat tint, rust stains and unwanted surface layers from the stainless steel surface.
The process does not just erase the discolouration; it also removes the thin chromium-depleted layer from the surface. The remaining surface regains its pre-weld chromium content and therefore its corrosion resistance.
The difference from mechanical methods (grinding, brushing, blasting) is this: mechanical methods remove the discolouration from view but may smear the chromium-depleted layer across the surface and leave carbon steel contamination. Pickling dissolves the layer chemically and removes it.
The difference between pickling and passivation
These two processes are often confused, but they do different jobs:
| Pickling | Passivation | |
|---|---|---|
| What it does | Removes oxide, discolouration and contamination from the surface | Accelerates the re-formation of the chromium oxide layer on the cleaned surface |
| Chemical character | Strong acid (mixed acids) | Nitric acid or citric acid based |
| Visual effect | Removes discolouration, leaves the surface matt/uniform | No visual change |
| Does it remove metal? | Yes, at micron level | No |
| Akem product | METOX S‑3000 · M‑1000 · W‑2000 | METOX P‑3000 |
In the conventional chemical process, pickling and passivation are two separate steps: first pickling, then rinsing, then passivation, then neutralisation.
With electrochemical weld cleaning machines (METOX 500 / 600), on the other hand, cleaning and passivation take place in a single step. The chemical process is suitable for large surfaces and series production; the electrochemical method is suitable for spot work, on-site repairs and low-volume production.
METOX S‑3000 — spray pickling
METOX S‑3000 is a pickling product suitable for spray application, developed to remove heat tint, oxide layers and mechanical marks formed after fabrication, cutting, welding and blasting of large-surface stainless steel structures and equipment.
It provides fast and uniform cleaning on large areas that gel-type pastes cannot reach or where roller/brush application is impractical.
Properties:
- Large-area application. Spraying easily reaches large and complex surfaces, reducing labour time and cost.
- Effective cleaning. Thoroughly removes weld burns, heat damage, rust and machining marks.
- Passivation support. Supports the re-formation of the chromium layer on the surface, restoring corrosion resistance.
- Compliance with standards. Complies with the requirements of ASTM A380 A.1 and BS CP 312.
Application: The product is applied to the surface with an acid-resistant spray pump. The dwell time is determined by the material grade, surface contamination and ambient temperature. After application, the surface is rinsed with plenty of water. To maximise corrosion resistance, the process is completed with METOX P‑3000 passivation.
Packaging: 20 kg
METOX M‑1000 — immersion pickling
METOX M‑1000 is an immersion acid formulated to remove weld burns, heat oxides, rust stains, surface defects formed during cutting and blasting, and particles that weaken the chromium layer from stainless steel surfaces.
Immersion ensures that the entire part is treated at once and uniformly. On parts with complex geometry, in inner corners and inside pipes, areas that spray or brush application cannot reach are cleaned by this method.
Properties:
- Thorough cleaning. Completely removes heat tint, oxidation and rust stains.
- Passivation support. Promotes the formation of a new, uniform passive layer on the surface during and after treatment.
- Adjustable concentration. Used at different concentrations for different stainless steel grades.
- Compliance with standards. Complies with ASTM A380 A.1 and BS CP 312.
Application by material grade: For standard austenitic stainless steels (304, 316), the application conditions are determined according to the product procedure. For high-alloy materials such as 904L, 254 SMO and super duplex, the concentration, bath temperature and dwell time differ from standard stainless steels — carry out a sample trial before treating these materials.
Packaging: 60 kg · 1,000 kg IBC tank
METOX W‑2000 — pickling paste
METOX W‑2000 is a pickling paste used to remove weld burns, stains caused by heat damage and layers that pave the way for local corrosion from stainless steel surfaces.
The paste form allows the product to stay on vertical surfaces and in overhead positions without running. This makes it the most practical product for spot application on weld seams — only the weld zone can be cleaned without treating the whole surface.
Instructions for use:
- Mix and shake METOX W‑2000 before use.
- Apply to the weld zone with a brush.
- Leave for 15–60 minutes. The time varies with the type of stainless steel, the type of contamination and the ambient temperature.
- The working temperature must be above +10 °C. At lower temperatures the reaction slows down and takes longer.
- Rinse the surface with a 100–150 bar pressurised water jet. Using a stainless steel wire brush or scotch pad during rinsing makes it easier to remove residues.
Packaging: 2 kg · 30 kg
Shelf life: 1 year when stored under suitable conditions. Avoid high temperatures and direct sunlight.
Important: The rinse water is acidic and cannot be discharged directly. Neutralise with METOX N‑3000 after rinsing.
METOX P‑3000 — passivation
METOX P‑3000 is a nitric acid-based passivation liquid used to restore the passive layer of stainless steel surfaces damaged by pickling or mechanical treatment (grinding, brushing).
Passivation accelerates and controls something stainless steel already does by itself on contact with air. Natural passivation takes days and may not be uniform; chemical passivation delivers the same result within minutes and evenly over the entire surface.
Properties:
- Passive layer formation. Ensures fast and controlled re-formation of the chromium oxide layer.
- Corrosion resistance. Significantly increases the corrosion resistance of the surface; extends service life, especially in aggressive environments.
- Free iron removal. Removes metallic contamination (free iron) from the surface. This contamination is transferred by contact with carbon steel tools or wire brushes and, if not removed, appears as rust stains on the stainless surface.
- Compliance with standards. Complies with the ASTM A967 and AMS 2700 passivation standards.
Application: By brush or spray. The treatment time and concentration are determined by the surface quality and process conditions. At the end of the treatment, the surface is rinsed with plenty of water.
Packaging: 30 kg · 1.000 kg IBC tank
METOX H‑3000 — acid-free passivation
METOX H‑3000 is a hydrogen peroxide-based stainless steel passivation liquid for spray application that contains no nitric acid or citric acid. It removes free iron from the surface and accelerates the re-formation of the protective chromium oxide layer.
Properties:
- Wet-on-wet application. Sprayed after pickling while the surface is still wet, before rinsing; reduces the risk of brown staining caused by free iron (smut).
- Nitrous gas reduction. Reduces the formation of toxic nitrous gases (NOx) during rinsing after pickling.
- Short reaction time. About 30 seconds after pickling, 3–5 minutes after mechanical treatment.
- Contains no nitric acid. The rinse water is close to neutral; it is not classified as dangerous goods for transport.
Application: With an acid-resistant spray pump. The product is intended for spray application; METOX P‑3000 is recommended for immersion.
Packaging: 30 kg · 1.000 kg IBC tank
METOX N‑3000 — neutralisation
METOX N‑3000 is a neutralisation liquid that neutralises acid residues remaining on the surface and in the rinse water after pickling and passivation.
It has two separate functions, and neither step should be skipped:
Surface protection. Acidic residue left on the surface after rinsing eventually restarts corrosion. Neutralisation renders this residue harmless.
Discharge compliance. Rinse water after pickling has a low pH and cannot be discharged directly into the sewer. METOX N‑3000 brings the pH of the waste water to a level compliant with environmental discharge standards.
Application note: Check the pH during neutralisation. Precipitation and removal of process waste containing heavy metals must be carried out in accordance with local environmental regulations.
Packaging: 30 kg · 1.000 kg IBC tank
Auxiliary surface treatment chemicals
| Product | What it does | Where it is used | Packaging |
|---|---|---|---|
| METOX AL‑04 | Removes the oxide layer, tarnish, and oil and dirt deposits from aluminium surfaces; restores natural brightness. Diluted at a ratio of 1/3 – 1/15. | Air-conditioning coils, aluminium joinery, truck/lorry trailer bodies, body panels | 30 kg jerrycan |
| METOX AS‑05 | Prevents hot spatter formed during welding from sticking to the surface. Water-based, non-flammable, odourless, paintable. Aerosol-free. | Stainless, carbon steel, galvanised — surface before welding and torch nozzle | 30 kg jerrycan · 1,000 kg IBC |
| METOX DGR‑02 | Alkaline concentrated cleaner that dissolves heavy oil, grease and carbonised dirt. Non-flammable, biodegradable. | Immersion bath, spray system, ultrasonic washing, manual wiping | 30 kg jerrycan |
| METOX DRP | Chemically dissolves rust, mill scale and limescale on iron and steel surfaces. Penetrates inner corners without damaging the surface geometry. | Iron and steel workshops, post-casting cleaning, pre-weld preparation, restoration | 30 kg jerrycan |
Example stainless steel surface treatment process
Complete process flow for a welded stainless steel tank:
| Step | Operation | Product | Note |
|---|---|---|---|
| 1 | Oil and dirt removal | METOX DGR‑02 | Acid does not work on an oily surface |
| 2 | Rinsing | Water | |
| 3 | Pickling | METOX S‑3000 (spray) / M‑1000 (immersion) / W‑2000 (paste) | Selected by method |
| 4 | Dwell | — | According to material, contamination and temperature |
| 5 | High-pressure rinsing | Water (100–150 bar) | Stainless-tipped brush or scotch pad |
| 6 | Passivation | METOX P‑3000 | Maximises corrosion resistance |
| 7 | Rinsing | Water | |
| 8 | Neutralisation | METOX N‑3000 | Surface + waste water, with pH control |
| 9 | Drying | — | Clean compressed air or natural drying |
Critical warning: Never use a carbon steel wire brush on stainless steel. Carbon steel particles become embedded in the surface and appear as rust stains within weeks. Use only stainless-tipped brushes or scotch pads, and keep these tools separate from those used on carbon steel work.
Quick Action
Request a quote now to get detailed information, request technical specifications or place an order for this product.
Product Details and Variants
- Metox AL 04 - Aluminium Cleaner
- Metox AS 05 - Anti-Spatter Liquid
- Metox DGR 02 - Water-Based Passivation Liquid
- Metox DRP - Rust Remover
- Metox M 1000 - Immersion Acid
- Metox P 3000 - Passivation Liquid
- Metox H 3000 - Acid-Free Passivation Liquid
- Metox S 3000 - Pickling Spray
- METOX W-2000 Weld Cleaning Paste
- Metox N 3000 - Neutralisation
Product Category
You can request MSDS and TDS documents from our technical documents page.
METOX — Frequently Asked Questions
The high temperature during welding damages the chromium oxide layer that protects stainless steel and leaves a chromium-depleted layer on the surface. This layer has much lower corrosion resistance than the rest of the material; if it is not cleaned, the first rusting starts here.
Pickling removes oxide and contamination from the surface. Passivation, on the other hand, accelerates the re-formation of the protective chromium oxide layer on the cleaned surface. Passivating after pickling maximises corrosion resistance.
For large surfaces, S‑3000 (spray). For small parts with complex geometry, M‑1000 (immersion). For spot application on weld seams and for vertical and overhead positions, W‑2000 (paste).
No. Grinding removes the discolouration from view but may smear the chromium-depleted layer across the surface and leave carbon steel contamination. A surface that looks clean may still be weak in terms of corrosion resistance.
For METOX W‑2000, the normal reaction time is between 15 and 60 minutes; it depends on the type of stainless steel, the contamination and the ambient temperature. The working temperature must be above +10 °C.
No. The rinse water is acidic. Neutralise it with METOX N‑3000, check the pH and dispose of waste containing heavy metals in accordance with local environmental regulations.
Yes, but the concentration, temperature and time differ from standard stainless steels. Carry out a sample trial before treating these materials.
S‑3000 and M‑1000: ASTM A380 A.1 and BS CP 312. P‑3000: ASTM A967 and AMS 2700.
1 year for METOX W‑2000 under suitable conditions. Avoid high temperatures and direct sunlight.
Yes. METOX 500 / 600 electrochemical weld cleaning machines clean and passivate in a single step; for spot work, on-site repairs and low-volume production they are more practical than the chemical process. For details, see the Weld Cleaning Machine page.