Pickling Spray - For large surfaces.
METOX — Other Pages
Product Category
Metox S 3000 - Pickling Spray

Metox S-3000 - Stainless Steel Pickling Spray
METOX S-3000 is a pickling product suitable for spray application, specially developed to remove heat tint, oxide layers and mechanical marks formed on the surfaces of large stainless steel structures or equipment during fabrication, cutting, welding and blasting. It provides fast and uniform cleaning on large areas that gel-type pastes cannot reach or where roller/brush application is difficult.
In the field it is also known as stainless steel pickling acid; it is used to remove weld and heat tint marks from stainless steel surfaces.
Features and Benefits:
- Large Area Application: Thanks to spraying, it can easily be applied to large and complex surfaces, reducing labour time and cost.
- Effective Cleaning: Thoroughly removes weld burns, heat damage, rust and machining marks from stainless steel surfaces.
- Passivation Support: Restores the corrosion resistance of the material by supporting the re-formation of the chromium layer on the surface.
- Compliance with Industrial Standards: Complies with the requirements of ASTM A-380 A.1 and BS CP 312, proving the product's reliability and performance.
Instructions for Use:
- Application: METOX S-3000 pickling spray is sprayed in a uniform layer onto the surface to be cleaned using an acid-resistant pump or a manual spray gun.
- Dwell Time: For standard steel grades such as 304 and 316, the typical reaction time is 60 minutes at 20 °C and 45 minutes at 30 °C. The time may vary with the condition of the surface. For optimum results, ambient temperatures above +10 °C should be preferred.
- Rinsing: At the end of the dwell time, the cleaned surface must be washed thoroughly with high-pressure water (100–150 bar) to remove all acid residues.
- Passivation (Optional): Where required, passivation of the surface can be completed with METOX P-3000 passivation liquid after rinsing with pressurised water.
CAUTION! METOX S-3000 is an acidic and corrosive product, and Personal Protective Equipment (PPE) must be used without exception. Acid-protective clothing, a full-face mask, goggles and chemical-resistant gloves are mandatory. The working area must be well ventilated, and the product must be used outdoors or in places with suitable ventilation systems.