Hydrogen peroxide-based passivation liquid for spray application.
METOX — Other Pages
Product Category
Metox H 3000 - Acid-Free Passivation Liquid

Metox H-3000 - Acid-Free Stainless Steel Passivation Liquid
METOX H-3000 is a hydrogen peroxide-based stainless steel passivation liquid for spray application that contains no nitric acid or citric acid. It removes free iron from the surface and, by accelerating the passivation process, enables the protective chromium oxide layer of stainless steel to re-form. It gives a reliable general passivation result on stainless steel surfaces across a wide range of industrial passivation applications.
Features and Benefits:
- Passive Layer Renewal: Re-forms the passive layer damaged by fabrication processes such as grinding, brushing and blasting, or in service.
- Superior Result after Pickling: Accelerates passivation after pickling; applied wet-on-wet, it reduces the risk of brown staining caused by free iron (smut).
- Nitrous Gas Reduction: Reduces the formation of toxic nitrous gases (NOx) during rinsing after pickling.
- Water Stain Prevention: Prevents staining caused by poor-quality rinse water.
- Contains No Nitric Acid: The rinse water is close to neutral; it is easy to use and is not classified as dangerous goods for transport.
Areas of Use:
- Stainless steel surfaces after spray pickling
- Surfaces that have undergone mechanical treatment such as grinding, brushing or blasting
- Removal of free iron (smut) and brown stains
- Reduction of nitrous gas formation during pickling
Application Instructions:
- Application: METOX H-3000 is applied with an acid-resistant spray pump. The product is intended for spray application; METOX P-3000 is recommended for immersion.
- After Pickling: Spray evenly "wet-on-wet" while the surface is still wet, before rinsing. After mechanical treatment, the surface is first cleaned and rinsed with water.
- Reaction Time: About 30 seconds after pickling and 3–5 minutes after mechanical treatment.
- Rinsing: The surface is rinsed with plenty of water. Deionised water is used for the final rinse to obtain a residue-free surface.
Packaging and Storage:
- Packaging: 30 kg jerrycan and 1,000 kg IBC polyethylene container.
- Storage: Store indoors at 5–35 °C in the original packaging. Metals, alkalis, organic substances, heat and UV light decompose the product; heat and sunlight may increase the pressure inside the container.
- Waste: The product and waste must not be discharged undiluted into the sewer and must be disposed of in accordance with local regulations.
CAUTION! Wear protective work clothing, neoprene gloves and tight-fitting safety goggles during application; use suitable respiratory protection if necessary. Avoid contact with textiles. For details, refer to the current Safety Data Sheet.