Concentrated industrial oil and dirt remover.
METOX — Other Pages
Product Category
Metox DGR 02 - Water-Based Passivation Liquid

Metox DGR-02 - Powerful Concentrated Oil and Dirt Remover
METOX DGR-02 is a high-performance, alkaline-based concentrated cleaner developed especially to remove heavy oil, grease, carbonised dirt and industrial residues from metal surfaces. It shows a powerful cleaning effect even when diluted with water and offers an economical solution.
Features and Benefits
- Highly Effective Formula: Easily dissolves even the most stubborn oil and dirt and leaves no residue on surfaces.
- Versatile Use: Can be used safely in immersion baths, spray systems, ultrasonic washing machines and manual wiping applications.
- Compatible with Metal Surfaces: Can be used safely on iron, steel, aluminium and many other metal surfaces and does not cause corrosion (dilution and application in line with the product instructions are important).
- Non-Flammable: Thanks to its water-based formula it is non-flammable and provides a safe working environment.
- Biodegradable: With its environmentally friendly nature it breaks down easily in nature, making waste management easier.
- Economical: Thanks to its concentrated structure it can be diluted with a high proportion of water, providing long-lasting and cost-effective use.
Areas of Use
- Cleaning of machine parts and equipment
- Factory floors and production lines
- Automotive and metalworking industry
- Aircraft engine and chassis cleaning
- Industrial kitchen equipment
- All heavy-duty industrial oil and dirt removal operations
Application Instructions (as a Degreaser)
It is used diluted with water at a ratio of 1/1 to 1/5 depending on the degree of soiling. After choosing the application method (spraying, immersion, wiping), leave it for a sufficient time and then rinse with plenty of water. Its effectiveness increases when used with hot water.
Use as a Citric Acid-Based Stainless Steel Passivation Liquid
METOX DGR-02 can also be used as a citric acid-based passivation liquid that contains no nitric acid. It helps remove free iron from the surface and, by accelerating the passivation process, enables the protective chromium oxide layer on stainless steel to re-form; it frees the surface from oil and dirt and leaves a passive layer. It is designed for a wide range of industrial passivation applications and generally delivers a good passivation result on stainless steel surfaces.
Key Features of the Passivation Liquid
- Restores the passivation layer on stainless steel surfaces damaged during fabrication by mechanical processes such as grinding, brushing or blasting.
- When used on a wet surface, it reduces the risk of bright stains or discolouration caused by free iron (smut).
- As it contains no nitric acid, it eliminates the formation of toxic nitric acid fumes that can occur during rinsing after pickling.
- Prevents water staining caused by poor-quality rinse water.
- Does not generate hazardous waste; it is easy to use and is not classified as a dangerous substance.
Application and Dosage (as a Passivation Liquid)
It is applied by spraying or immersion to remove traces of contamination, oil/grease residues and thin rust layers from stainless steel surfaces; after thorough cleaning it gives the surface a visible brightening effect. The minimum application/dwell time on stainless steel surfaces is 15 minutes. 1 kg of product is sufficient for approximately 8–12 m² of surface area. The product must not be used or stored under the effect of heat; the hazard and safety warnings on the packaging must be read carefully before use.